HANS VIỆT NAM CHUYÊN CUNG CẤP DÒNG CẢM BIẾN QUANG OMRON DÒNG E3Z TẠI VIỆT NAM.
THÔNG SỐ KỸ THUẬT
| Sensing method | Through-beam | Retro- reflective with MSR function |
Diffuse-reflective | (Narrow- beam Models) |
|||||
|---|---|---|---|---|---|---|---|---|---|
| Model | NPN output |
Pre-wired | E3Z-T61 | E3Z-T62 | E3Z-T61A | E3Z-R61 | E3Z-D61 | E3Z-D62 | E3Z-L61 |
| Connector (M8) |
E3Z-T66 | E3Z-T67 | E3Z-T66A | E3Z-R66 | E3Z-D66 | E3Z-D67 | E3Z-L66 | ||
| PNP output |
Pre-wired | E3Z-T81 | E3Z-T82 | E3Z-T81A | E3Z-R81 | E3Z-D81 | E3Z-D82 | E3Z-L81 | |
| Connector (M8) |
E3Z-T86 | E3Z-T87 | E3Z-T86A | E3Z-R86 | E3Z-D86 | E3Z-D87 | E3Z-L86 | ||
| Sensing distance | 15 m | 30 m | 10 m | 4 m (100 mm) *1 (when using E39-R1S) 3 m (100 mm) *1 (when using E39-R1) |
100 mm (white paper: 100 × 100 mm) |
1 m (white paper: 300 × 300 mm) |
90 + 30 mm (white paper, 100 x 100 mm) |
||
| Spot diameter (reference value) |
--- | (2.5 dia. And sensing distance of 90 mm) |
|||||||
| Standard sensing object | Opaque: 12-mm dia. min. | Opaque: 75-mm dia. min. |
--- | ||||||
| Minimum detectable object (reference value) |
--- | 0.1 mm (copper wire) |
|||||||
| Differential travel | --- | 20% max. of setting distance |
Refer to Engineering data on Catalog. |
||||||
| Directional angle | Both emitter and receiver: 3 to 15° |
2 to 10° | --- | ||||||
| Light source (wavelength) | Infrared LED (870 nm) |
Red LED (660 nm) |
Red LED (660 nm) |
Infrared LED (860 nm) |
Red LED (650 nm) |
||||
| Current consumption | 35 mA max. (Emitter: 15 mA max., Receiver: 20 mA max.) |
30 mA max. | |||||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection |
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection |
|||||||
| Response time | Operate or reset: 1 ms max. |
Operate or reset: 2 ms max. |
Operate or reset: 1 ms max. | ||||||
| Degree of protection | IEC, IP67 | ||||||||
| Connection method | Pre-wired cable (standard length: 2 m and 0.5 m), Connector (M8) | ||||||||
| Weight (packed state) |
Pre-wired cable (2 m) |
Approx. 120 g | Approx. 65 g | ||||||
| Connector | Approx. 30 g | Approx. 20 g | |||||||
| Material | Case | PBT (polybutylene terephthalate) | |||||||
| Lens | Modified polyarylate | Methacrylic resin |
Modified polyarylate | ||||||
| Sensing method | Retro-reflective for clear, plastic bottles (without MSR function) | ||||
|---|---|---|---|---|---|
| Model | NPN output | E3Z-B61 | E3Z-B66 | E3Z-B62 | E3Z-B67 |
| PNP output | E3Z-B81 | E3Z-B86 | E3Z-B82 | E3Z-B87 | |
| Sensing distance | 500 mm (80 mm) *1 (using E39-R1S) | 2 m (500 mm) *1 *2 (using E39-R1S) | |||
| Standard sensing object | Opaque materials, 75mm dia. min. (Standard detectable object:glass Cylinder 15mm dia. thickness 1.1mm length 50mm, and the transmission factor 92% or less in wave length 660nm) |
||||
| Light source (wavelength) | Red LED (660 nm) | ||||
| Current consumption | 30 mA max. | ||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection |
||||
| Response time | Operate or reset: 1 ms max. | ||||
| Degree of protection | IEC, IP67 | ||||
| Connection method | Pre-wired cable (standard length: 2 m and 0.5 m) |
Connector (M8, 4 pins) |
Pre-wired cable (standard length: 2 m and 0.5 m) |
Connector (M8, 4 pins) |
|
| Weight (packed state) |
Pre-wired cable (2 m) | Approx. 65 g | |||
| Standard Connector | Approx. 20 g | ||||
| Material | Case | PBT (polybutylene terephthalate) | |||
| Lens | Modified polyarylate | ||||
| Sensing method | Transparent glass Limited-reflective (for transparent object detection ) |
||
|---|---|---|---|
| Model | NPN output | E3Z-L63 | E3Z-L68 |
| PNP output | E3Z-L83 | E3Z-L88 | |
| Sensing distance | 30±20 mm (transparent glasses 100 × 100 mm) | ||
| Spot diameter (reference value) | 2-mm dia. min. (at sensing distance of 30 mm) | ||
| Minimum detectable object (reference value) |
0.1 mm dia. (copper wire) | ||
| Light source (wavelength) | Red LED (660 nm) | ||
| Current consumption | 30 mA max. | ||
| Protection circuits | Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention, Reverse output polarity protection |
||
| Response time | Operate or reset: 1 ms max. | ||
| Degree of protection | IEC, IP67 | ||
| Connection method | Pre-wired (standard length: 2 m) | M8 connector | |
| Weight (packed state) |
Pre-wired cable (2 m) | Approx. 65 g | |
| Standard Connector | Approx. 20 g | ||
| Material | Case | PBT (polybutylene terephthalate) | |
| Lens | Modified polyarylate | ||
Oil-resistant
| Sensing method | Through-beam | Retro-reflective | Diffuse-reflective | |||
|---|---|---|---|---|---|---|
| Model | NPN output |
Pre-wired Models |
E3Z-T61K | E3Z-R61K | E3Z-D61K | E3Z-D62K |
| M8 Pre-wired connector |
E3Z-T61K-M3J | E3Z-R61K-M3J | E3Z-D61K- M3J |
E3Z-D62K- M3J |
||
| PNP output |
Pre-wired Models |
E3Z-T81K | E3Z-R81K | E3Z-D81K | E3Z-D82K | |
| M8 Pre-wired connector |
E3Z-T81K-M3J | E3Z-R81K-M3J | E3Z-D81K- M3J |
E3Z-D82K- M3J |
||
| Sensing distance | 15 m | 3 m (150 mm) * (when using E39-R1S) 2 m (100 mm) * (when using E39-R1) |
100 mm (white paper: 100 × 100 mm) |
1 m (white paper: 300 × 300 mm) |
||
| Standard sensing object | Opaque: 12-mm dia. min. | Opaque: 75-mm dia. min. |
--- | |||
| Differential travel | --- | 20% max. of setting distance | ||||
| Directional angle | Both emitter and receiver: 3 to 15 ° |
2 to 10 ° | --- | |||
| Light source (wavelength) | Infrared LED (870 nm) | Red LED (660 nm) | Infrared LED (860 nm) | |||
| Current consumption | 35 mA max. (Emitter: 15 mA max., Receiver: 20 mA max.) |
30 mA max. | ||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection |
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection |
||||
| Response time | Operate or reset: 1 ms max. | |||||
| Degree of protection | IP67 (IEC), Oil resistant models: IP67 (IEC) (in-house standards: oilproof), excluding cables and connectors |
|||||
| Connection method | Pre-wired cable (standard length: 2 m), M8 Pre-wired Connector | |||||
| Weight (packed state) |
Pre-wired cable (2 m) | Approx. 120 g | Approx. 65 g | |||
| Connector (M8, 4 pins) | Approx. 50 g | Approx. 30 g | ||||
| Material | Case | PBT (polybutylene terephthalate) | ||||
| Lens | Modified polyarylate | Methacrylic resin | Modified polyarylate | |||
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Common
| Power supply voltage | 12 to 24 VDC±10%, ripple (p-p): 10% max. |
|---|---|
| Control output | Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max. Open collector output (NPN/PNP depending on model) Light-ON/Dark-ON selectable |
| Sensitivity adjustment | One-turn adjuster |
| Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. |
| Ambient temperature range |
Operating: -25 to 55°C, Some connector models: -40°C to 55°C * (with no icing or condensation) Storage: - 40 to 70 °C (with no icing or condensation) |
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min |
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
| Indicator | Operation indicator (orange) Stability indicator (green) Through-beam Emitter has power indicator (orange) only. |
| Accessories | Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.) |
* The ambient temperature range during operation for connector models depends on the model. For the E3Z-T66/T86/
R66/R86, the range is −40°C to 55°C. For the E3Z-D66/D86/D67/D87, the range is −30°C to 55°C. For other connector
models, the range is −25°C to −55°C.
The sensing distance for Retro-reflective Models (E3Z-R66/R86) between −40°C to −25°C, however, will be as follows
(not the values in the table): With E39-R1S: 3 m (100 mm), With E39-R1: 2 m (100 mm).
Also, use the XS3F-M42[]-4[][]-L Sensor I/O Connector (PUR cable) for applications between −25°C to −40°C. (Refer
to Catalog.)
![CẢM BIẾN PHOTOELECTRIC OMRON LOẠI IO-Link DÒNG E3Z-D82-IL[]](https://automation-tech.com.vn/mediacenter/media/images/2198/products/2198/2462/s200_200/1-1540869378.jpg)