GIỚI THIỆU DÒNG CẢM BIẾN QUANG PANASONIC CX SERIES

27/09/2019 15:15

ỨNG DỤNG DÒNG CẢM BIẾN QUANG PANASONIC CX SERIES

 

THÔNG TIN SẢN PHẨM DÒNG CẢM BIẾN QUANG PANASONIC CX SERIES

 

Standard type

Type Thru-beam
  Long sensing range
Model No. NPN output CX-411 CX-412 CX-413
PNP output CX-411-P CX-412-P CX-413-P
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 10 m
32.808 ft
15 m
49.213 ft
30 m
98.425 ft
Sensing object ø12 mm ø0.472 in or more opaque object (Note 4)
Hysteresis -
Repeatability
(perpendicular to sensing axis)
0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption Emitter:
15 mA or less
Receiver:
10 mA or less
Emitter:
20 mA or less
Receiver:
10 mA or less
Emitter:
25 mA or less
Receiver:
10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
  Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection Incorporated
Response time 1 ms or less 2 ms or less
Operation indicator Orange LED
(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator Green LED
(lights up when the power is ON)
(incorporated on the emitter)
Sensitivity adjuster Continuously variable adjuster
(incorporated on the receiver for thru-beam type)
Automatic interference
prevention function
Two units of sensors
can be mounted
close together
with interference
prevention filters.
(Sensing range: 5 m
16.404 ft)
-
Protection IP67 (IEC)
Ambient temperature - 25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED Infrared LED
  Peak emission wavelength 680 nm 0.027 mil 870 nm 0.034 mil 850 nm 0.033 mil
Material Enclosure: PBT (polybutylene terephthalate),
Lens: acrylic (CX-48□: polycarbonate),
Indicator cover: acrylic (CX-48□: polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Weight Net weight Emitter: 45 g approx., Receiver: 50 g approx.
Gross weight 100 g approx.
Accessory -
Type Retroreflective
With polarizing filters Long sensing range For transparent object sensing
Model No. NPN output CX-491 CX-493 CX-481 CX-483 CX-482
PNP output CX-491-P CX-493-P CX-481-P CX-483-P CX-482-P
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 3 m
9.843 ft (Note 2)
5 m
16.404 ft (Note 2)
50 to 500 mm
1.969 to 19.685 in (Note 2)
50 to 1,000mm
1.969 to 39.37 in (Note 2)
0.1 to 2 m
0.328 to 6.562 ft (Note 2)
Sensing object ø50 mm
ø1.969 in or
more opaque,
translucent or
specular object
(Note 2, 5)
ø50 mm
ø1.969 in or
more opaque
or translucent
object
(Note 2, 5)
ø50 mm ø1.969 in or more transparent,
translucent or opaque object
(Note 2, 5)
Hysteresis -
Repeatability
(perpendicular to sensing axis)
0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 13 mA or less 10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
  Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED
(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator -
Sensitivity adjuster Continuously variable adjuster
(incorporated on the receiver for thru-beam type)
Automatic interference
prevention function
Incorporated
(Two units of sensors can be mounted close together.)
Protection IP67 (IEC)
Ambient temperature - 25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED Infrared LED
  Peak emission wavelength 680 nm 0.027 mil 650 nm 0.026 mil 870 nm 0.034 mil
Material Enclosure: PBT (polybutylene terephthalate),
Lens: acrylic (CX-48□: polycarbonate),
Indicator cover: acrylic (CX-48□: polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Weight Net weight 50 g approx.
Gross weight 80 g approx.
Accessory RF-230 (Reflector): 1 pc.
Type Diffuse reflective
  Narrow-view
Model No. NPN output CX-424 CX-421 CX-422 CX-423
PNP output CX-424-P CX-421-P CX-422-P CX-423-P
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 100 mm
3.937 in
(Note 3)
300 mm
11.811 in
(Note 3)
800 mm
31.496 in
(Note 3)
70 to 300 mm
2.756 to 11.811 in
(Note3)
Sensing object Opaque, translucent or
transparent object (Note 5)
Opaque, translucent
or transparent
object (Note 5)
(Min. sensing object:
ø0.5 mm ø0.020 in
copper wire)
Hysteresis 15 % or less of operation distance (Note 3)
Repeatability
(perpendicular to sensing axis)
1 mm 0.039 in or less 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 13 mA or less 15 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
  Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED
(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Power indicator -
Sensitivity adjuster Continuously variable adjuster
(incorporated on the receiver for thru-beam type)
Automatic interference
prevention function
Incorporated
(Two units of sensors can be mounted close together.)
Protection IP67 (IEC)
Ambient temperature - 25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Infrared LED Red LED
  Peak emission wavelength 860 nm 0.034 mil 645 nm 0.025 mil
Material Enclosure: PBT (polybutylene terephthalate),
Lens: acrylic (CX-48□: polycarbonate),
Indicator cover: acrylic (CX-48□: polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable
(thru-beam type: both emitter and receiver).
Weight Net weight 50 g approx.
Gross weight 60 g approx.
Accessory -

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.

3) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
4) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.
5) Make sure to confirm detection with an actual sensor before use.
 

Type Adjustable range reflective
Small spot  
Model No. NPN output CX-441 CX-443 CX-444 CX-442
PNP output CX-441-P CX-443-P CX-444-P CX-442-P
CE marking directive compliance EMC Directive, RoHS Directive
Adjustable range (Note 2) 20 to 50 mm 0.787 to 1.969 in 20 to 100 mm
0.787 to 3.937 in
40 to 300 mm
1.575 to 11.811 in
Sensing range
(with white non-glossy paper)
2 to 50 mm 0.079 to 1.969 in 15 to 100 mm
0.591 to 3.937 in
20 to 300 mm
0.787 to 11.811 in
Hysteresis 2 % or less of operation distance
(with white non-glossy paper)
5 % or less of operation distance
(with white non-glossy paper)
Repeatability Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 20 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
  Output operation Switchable either Detection-ON or Detection-OFF
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable operating condition)
Distance adjuster 5-turn mechanical adjuster
Sensing mode BGS / FGS functions switchable with wiring of sensing mode selection input
Automatic interference
prevention function (Note 3)
Incorporated
Protection IP67 (IEC)
Ambient temperature -25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Spot diameter ø2 mm ø0.079 in approx.
(at 50 mm 1.969 in distance)
ø6.5 mm ø0.256 in approx.
(at 50 mm 1.969 in distance)
ø9 mm ø0.354 in approx.
(at 100 mm 3.937 in distance)
ø15 mm ø0.591 in approx.
(at 300 mm 11.811 in distance)
Material Enclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: Polycarbonate
Cable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 55 g approx., Gross weight: 65 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in [CX-444(-P): 15 mm 0.591 in, CX-442(-P): 20 mm 0.787 in], or more, away.
3) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.

Basic type

Type Thru-beam
Small spot Long sensing range
Light-ON Dark-ON Light-ON Dark-ON
Model No. NPN output CX-411A-C05 CX-411B-C05 CX-412A-C05 CX-412B-C05
PNP output CX-411A-P-C05 CX-411B-P-C05 CX-412A-P-C05 CX-412B-P-C05
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 10 m 32.808 ft 15 m 49.213 ft
Sensing object ø12 mm ø0.472 in or more opaque object (Note 3)
Hysteresis -
Repeatability
(perpendicular to
sensing axis)
0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 15 mA or less
Receiver: 10 mA or less
Emitter: 20 mA or less
Receiver: 10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
  Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator Green LED (lights up when the power is ON)
(incorporated on the emitter)
Sensitivity adjuster -
Automatic interference
prevention function
Two units of sensors can be mounted
close together with interference prevention
filters. (Sensing range: 5 m 16.404 ft)
-
Protection IP67 (IEC)
Ambient temperature -25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED Infrared LED
  Peak
emission
wavelength
680 nm 0.027 mil 870 nm 0.034 mil
Material 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft long
Cable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)
Weight Net Emitter: 20 g approx., Receiver: 20 g approx.
Gross 50 g approx.
Type Retroreflective
With polarizing filters
Light-ON Dark-ON
Model No. NPN output CX-491A-C05-Y CX-491B-C05-Y
PNP output CX-491A-P-C05-Y CX-491B-P-C05-Y
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 3 m 9.843 ft (Note 2)
Sensing object ø50 mm ø1.969 in or more transparent,
translucent or opaque object (Note 2, 4)
Hysteresis -
Repeatability
(perpendicular to
sensing axis)
0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 13 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
  Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator Green LED (lights up when the power is ON)
(incorporated on the emitter)
Sensitivity adjuster -
Automatic interference
prevention function
Incorporated (Two units of sensors can be mounted close together.)
Protection IP67 (IEC)
Ambient temperature -25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED
  Peak
emission
wavelength
680 nm 0.027 mil
Material 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft long
Cable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)
Weight Net 20 g approx.
Gross 30 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.

3) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.
4) Make sure to confirm detection with an actual sensor before use.

Thong ke